3pin magnetic connector 3A male female pogo pin charger terminal.
UPE – Professional Magnetic Connector & Cable Manufacturer | Custom Solutions
UPE stands as a premier manufacturer at the forefront of connectivity technology. We specialize in the design and production of advanced magnetic connectors and high-performance cable assemblies.
Male magnetic connector:
Materials:
-Insulator: HTN+30% UL94 V-0 black
-Magnet: Neodymium iron boron
Mechanical:
-Contact force:80g±20g at 1.0mm working storke
-Male and female adsorption Life test: 50,000cycle
-Adsorption capacity test:The parent docking adsorption is more than 600G
Electrical:
-Reference voltage:12V,
-Continuous working current: 3.0 A;
-Contact static impedance of the needle:50mΩ Max (PIN).
-High voltage test: AC1000 V0.5mA 3SEC / DC 1000V 0.5mA 3 SEC.
Environmental performance:
-Environmental Test: Salt Spray 48 hours
Product application explaination(not limited to the following):
1. The PCB board can be soldered with a plug-in;
2. After soldering, the board can be molded and coated;
3. The PCB board can be connected with a terminal;
4. The mold can be molding and injection molding;
5. The wire can be directly soldered.
Female magnetic connector
Materials:
-The yellow metal needle part is gold-plated with brass surface;
-The plastic material is HTN+30%UL94 V-0 black, which can withstand high temperatures.
-The magnet adopts high-performance permanent magnet neodymium iron boron;
Electrical properties:
-Reference voltage: 12V,
-Continuous working current: 5.0 A;
-Contact static impedance of the needle:50mΩ Max (PIN).
-High voltage test: AC1000 V 0.5mA 3SEC / DC 1000V 0.5mA 3 SEC.
.Product introduction and explaination:
-The product adopts environmental protection materials, ROHS,REACH;
-The attraction force of the magnetic male and female docking is more than 600G.
Product anti-short-circuit structure design;
-Polarity and electrical direction are clearly identified.
(The magnet can be coated with epoxy resin, and the salt spray test can pass 48hours.)
-The pin feet are fixed on the PCB board, and the pin spacing size is stable.
Product application explaination (not limited to the following):
1. The PCB board can be soldered with a plug-in;
2. Mold molding and injection molding;
3Pin Male Magnetic Connectors & Female Magnetic Connector Parameter:
| Name | Magnetic Connector |
| Type | Male/Female |
| Pin | 3pin |
| Color | Black |
| Pogo pin | Brass 0.125 um Auover 1.5um~2.5um Ni |
| Female pin | Brass 0.125 um Auover 1.5um~2.5um Ni |
| Shell | SUS304 |
| Insulator | HTN+30% UL94 V-0 black |
| Magnet | NdFeB N52 1.5um~2.5um Ni |
| Spring force | 80g±20g,at 1.0mm working storke. |
| Mechanical life | 50000 cycle Min.. |
| Magnetic force | 600g |
| Current | 3.0AMax |
| Voltage | DC12V |
| Contact resistance | 50mΩ Max (PIN). |
| Operation Temperature | 25℃to +60℃ |
| Salt spray test | 48H |
| Certification | ROHS or REACH compliant product |
| Test | 100% open and short test |
3Pin Male Magnetic Connector Technical Drawing
3Pin Female Magnetic Connector Technical Drawing
Advantages of Magnetic Connector:
1)Automatic adsorption connected experience; Easy operation;
2)Uses a magnetic interface to remove the device easier.
3)High life cycle. It supports 50,000-300,000 reattachment life times;
4)It is easy to customized waterproof design, the female can achieve dust-proof and waterproof (IP68);
5)Support a high current (3A-20A), faster recharge;
6)Excellent corrosion rating (48H-120H) meet the harsh environments；
8)Shape customized to meet with product shape matching, improve product selling point;
9)Magnet positioning, use of magnets and structure to dual circuit protection reach distinguish
the direction( It is user-oriented and user-friendly)
10)Excellent scalability interface,Can be achieved(Power Signal Video Audio Jack Etc);
11)Development time is short, low-cost mold for customization;
12)Provide a reliable high RF signal transmission. Our connector is USB 2.0
Magnetic connector products application:
1.Wearable devices, intelligent positioning equipment, children's smart wristbands, smart watches, wearable mobile phones,Bluetooth headsets, etc.) data cable, charging cable, magnetic strip wire end connection
2.Medical equipment,wireless equipment,data communications equipment,telecommunication equipment,Automation and industrial equipment,audio-visual equipment
3.Aviation ,aerospace electronic,military communication
4.Automotive,car navigation,test and measurement equipment
5.Consumer Electronics(mobile phones,tablet computers,Bluetooth headsets,camera,watch,portable consumer electronic products and many other electronic fields.)
Why UPE shall be your partner?
1.Specialized Expertise in Magnetic Connectors
●Focused R&D: UPE has dedicated experience in magnetic connectors
●Customization: UPE can tailor magnet strength, pin plating (gold/nickel for ≤50mΩ resistance), and housing materials (black PBT/nylon) to your needs.
2. High Durability & Compliance
●10,000+ Cycles Guaranteed: Their connectors likely undergo rigorous testing to meet your mechanical life demand.
●Certifications: Compliant with UL, or RoHS standards—critical for consumer/medical markets.
3. Competitive Manufacturing
●Cost-Effective Tooling: UPE may offer low MOQs (e.g., 1K–5K units) with competitive pricing for small-to-medium batches.
●Quality Control: In-house testing for contact resistance, pull force, and current load to ensure reliability.
4. Fast Prototyping & Support
●3D Samples in Days: Rapid prototyping for fit/function checks
●Engineering Support: Assistance with pinout optimization, EMI shielding, or waterproofing (IP68).
5.Tailored Designs
Our in-house team of professional engineers collaborates closely with clients to develop fully customized magnetic pogo pin connectors tailored to your specific requirements.
6.Versatile Solutions
We design a wide range of magnetic connectors for diverse applications, ensuring optimal performance, durability, and seamless connectivity.
7. End-to-End Support
From concept to production, we provide end-to-end magnetic connector customization services, delivering solutions that meet exact industry standards and application needs.
How to Place Your Magnetic Cable Connector Order with UPE
1. Submit Your Requirements
Contact our sales team via:
Email: [union@upetech.net]
Phone: [+86 13434524996]
Online Form: [www.pogopinsconnector.com]
Provide details:
✔ Application (e.g., medical, automotive, consumer electronics)
✔ Connector type (e.g., magnetic pogo pin, charging cable)
✔ Specifications (voltage, current, size, waterproof rating, etc.)
✔ Quantity & lead time
2. Get a Custom Solution (If Needed)
Our engineers will review your needs and propose a custom design (if required).
We’ll share 3D models, samples, or technical drawings for approval.
Payment Term:
50% Deposit (Paid upfront): Covers production costs (materials, labor).
50% Balance (Paid before shipment): Ensures quality control and commitment from both parties.
Payment method:
T/T (Bank Transfer),PayPal ,OCBC Bank
Recommendation:
Use PayPal for samples (safer).
Use T/T for bulk orders (lower fees).
Sample Lead Time: Inventory sample 2-3Working day/customized sample 5-7Working day
Production Lead Time:10-15Working day
Made For: America,Europe,Asia,South African
Trade Term: EXW
Freight: Air,Sea,Express
Service: High quality with reasonable price, OEM service, any special size, color, designs are acceptable
Shipping
Product Tags:
|
|
3pin magnetic connector 3A male female pogo pin charger terminal Images
|
